TRAINING ADVANCED OIL AND GAS PRODUCTION SYSTEM

TRAINING ADVANCED OIL AND GAS PRODUCTION SYSTEM

TRAINING ADVANCED OIL AND GAS PRODUCTION SYSTEM

Training Oil And Gas Production System

Training Oil Gas Production

TRAINING ADVANCED OIL AND GAS PRODUCTION SYSTEM

DESKRIPSI ADVANCED OIL AND GAS PRODUCTION SYSTEM

sistem produksi merupakan kumpulan dari beberapa elemen yang saling berhubungan dan saling membutuhkan satu sama lain. Sistem produksi terdiri dari dua komponen yaitu komponen fungsional dan komponen struktural.

The rapidly increasing worldwide demand for natural gas as an energy source requires expertise in gas engineering technology. Incorporating a balance between theory and application, course emphasis is on training participants for immediate application of acquired techniques to field problems.

Production is defined as the operations involved in bringing well fluids to the surface and preparing the fluids for transport to a refinery via pipelines or trucks. The first step in production is to start the well fluids flowing to the surface (called “well completion”). Well servicing and workover consists of performing routine maintenance operations (such replacing worn or malfunctioning equipment) and performing more extensive repairs, respectively. Well servicing and workover are an intermittent step and necessary to maintain the flow of oil and gas. Next, the fluid must be separated into its components of oil, gas, and water; stored; and treated (for purification), measured, and tested before being transported to the refinery.

This training will provide the principle and yet some practical and theoretical aspect that can be applied on daily work faced by production engineers and supervisor in the oil industry.
Jadwal Lainnya :
Petty Cash Management & Administration (BANDUNG)

Perlunya memilih provider training NISBI INDONESIA yang tepat agar pengetahuan kita mengenai ADVANCED OIL AND GAS PRODUCTION SYSTEM tidak salah

TUJUAN TRAINING ADVANCED OIL AND GAS PRODUCTION SYSTEM

  1.  All aspects of completions are covered in sufficient detail to permit participants to review his/her current practices
  2. The fundamental concepts of production operations and their proper application in the field
  3. Production equipment such as wellhead, tubing and packers, well completions and workover as well as well test and problems, production logging and cementing will also covered
  4. Production logs and how and when to use them; evaluation techniques for cement bond logs and pulse echo tools
  • Learn how to plan and implement well completions, workovers, stimulation treatments, and routine production operations with an efficiency that increases profits
  • Learn about the role of rock mechanics in completions, stimulation, and workovers
  • Be able to give suggest or discover the procedures and techniques that increase production and cut operating costs
  • Be Able to identify and implement production improvement opportunities that can be carried out by either rig or non-rig well interventions
  • Implementation of appropriate technology, either from internal or external sources, in well design, whilst ensuring that the well value is maximised

Dengan mengikuti pelatihan NISBI INDONESIA Peserta dapat berbagi pengetahuan / sharing knowledge mengenai ADVANCED OIL AND GAS PRODUCTION SYSTEM dengan peserta dari perusahaan lain yang bergerak di bidang ADVANCED OIL AND GAS PRODUCTION SYSTEM

MATERI TRAINING ADVANCED OIL AND GAS PRODUCTION SYSTEM

  1. GEOLOGICAL CONSIDERATION
    • Formation Rock
    • Primary and Secondary Migrations
    • Reservoir Traps
  2. RESERVOIR FUNDAMENTALS THEORY
    • The Nature of Rocks and Fluids
    • Porosity and Permeability
    • Productivity Index
    • Volumetric Calculation
    • Other Calculations and Decline Curves
  3. FLUID FLOW
    • Well Productivity
    • Choke and Reservoir Fluids
    • Inflow and Outflow
  4. PRODUCTION OPERATIONS
    •  Well head and Well Head Equipment
    • Multiple Orifice
    • Routine Operations
    • Opening and Shut-in Well Procedure
  5. WELL TESTING AND SATELLITE SYSTEM
    • Test Separator Operations and Equipments
    • Gas Systems Instruments
    • Flare System and Depressurising
    • Pigging Techniques and Procedures
    • Sampling and Analysis
    • BS & W and API Gravity Measurement
    • Protective Steam Tracing
  6. SURFACE PRODUCTION OPERATIONS
    • Process, Level, Temperature and Pressure Controls
    • Oil treating , Heater treater and Dehydrator
    • Separators, Stage Separators and Sizing
    • Two-phase and Three-phase Separation
    • Skimmer tank and Flotation unit
  7. WELL PROBLEMS
    • Low Production and Formation Damage
    • Low Reservoir
    • Plug-in Tubing or Perforations
    • High Viscosity
    • High Back Pressure
    • Inadequate Artificial Lift
    • Water Production and Mechanical Problem
    • Protective Steam Tracing
  8. PRODUCTION LOGS
  9. WELL COMPLETIONS
  10. PRIMARY CEMENTING AND SQUEEZE CEMENTING
  11. FLUID COMPLETIONS
  12. SAND CONTROL
    Gravel Pack, Resin and Fraspac
  13. WORKOVERS
  14. PARAFFIN AND ASPHALTENES
    • Chemical analysis
    • Precipitation Mechanism
    • The wax and Paraffin Problems
  15. OIL EMULSIONS
    • Emulsion Built-up and Emulsifying Agent
    • Sampling and Analysis
    • Emulsion Treating
    • Heat and Chemical Treatment
    • Electrostatic Coalescing
  16.  SCALE PROBLEMS
    •  Scale Composition, Prediction and Identification
    • Mechanic and Chemical methods
    • Scale Prevention and Inhibitors
  17. CORROSION PREVENTIONS
    • Basic Theory
    • Detection and Measurement
    • Prevention and Material Used
    • Coating and Chemicals
    • Cathodic Protections and inhibitors

PESERTA TRAINING ADVANCED OIL AND GAS PRODUCTION SYSTEM

  • Production, Operations, Facilities and Senior Petroleum Engineers
  • Surface Equipment Technicians, Technical or Reservoir Engineers
  • Supervisory Personnel who interact with field facility engineers/operators
  • Production Managers and Field Production Supervisors
  • Engineers and other personnel involved with the daily operation and management of producing oil and gas wells.

METODE TRAINING ADVANCED OIL AND GAS PRODUCTION SYSTEM

Metode penyelenggaraan baik secara training online atau training zoom atau training daring maupun training offline atau training tatap muka :

  1. Presentasi
  2. Diskusi antar peserta
  3. Studi kasus
  4. Simulasi
  5. Evaluasi
  6. Konsultasi dengan instruktur

TRAINER/ INSTRUKTUR

Instruktur yang berkompeten di bidang ADVANCED OIL AND GAS PRODUCTION SYSTEM
Tim Instruktur NISBI INDONESIA
Kegiatan training dan konsultansi dikelola oleh para tenaga ahli dan instruktur yang berpengalaman dan berkompeten di bidangnya. Ini akan menjadi “kunci” bagi suksesnya aktivitas training dan konsultansi yang dijalankan.Juga menjadi kunci bagi perkembangan perusahaan anda di masa depan.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2025

  • BATCH 1 : 13-14 Januari 2025
  • BATCH 2 : 10-11 Februari 2025
  • BATCH 3 : 10-11 Maret 2025
  • BATCH 4 : 14-15 April 2025
  • BATCH 5 : 15-16 Mei 2025
  • BATCH 6 : 12-13 Juni 2025
  • BATCH 7 : 10-11 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025
  • BATCH 9 : 17-18 September 2025
  • BATCH 10 : 16-17 Oktober 2025
  • BATCH 11 : 13-14 November 2025
  • BATCH 12 : 15-16 Desember 2025
  • BATCH 1 : 13-14 Januari 2025
  • BATCH 2 : 10-11 Februari 2025
  • BATCH 3 : 10-11 Maret 2025
  • BATCH 4 : 14-15 April 2025
  • BATCH 5 : 15-16 Mei 2025
  • BATCH 6 : 12-13 Juni 2025
  • BATCH 7 : 10-11 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025
  • BATCH 9 : 17-18 September 2025
  • BATCH 10 : 16-17 Oktober 2025
  • BATCH 11 : 13-14 November 2025
  • BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,