TRAINING ADVANCED PRODUCTION OPERATIONS FOR OIL AND GAS
TRAINING ADVANCED PRODUCTION OPERATIONS FOR OIL AND GAS
TRAINING ADVANCED PRODUCTION OPERATIONS FOR OIL AND GAS
Training Be Able To Identify And Implement Production
Training Principle And Yet Some Practical And Theoretical Aspect
DESKRIPSI ADVANCED PRODUCTION OPERATIONS FOR OIL AND GAS
Production operations management is about getting things right. Get the quantity of products that are the right level of quality at the right time and the right cost. Leverage technology to simplify the process.
The rapidly increasing worldwide demand for natural gas as an energy source requires expertise in gas engineering technology. Incorporating a balance between theory and application, course emphasis is on training participants for immediate application of acquired techniques to field problems.
Production is defined as the operations involved in bringing well fluids to the surface and preparing the fluids for transport to a refinery via pipelines or trucks. The first step in production is to start the well fluids flowing to the surface (called “well completion”). Well servicing and workover consists of performing routine maintenance operations (such replacing worn or malfunctioning equipment) and performing more extensive repairs, respectively. Well servicing and workover are an intermittent step and necessary to maintain the flow of oil and gas. Next, the fluid must be separated into its components of oil, gas, and water; stored; and treated (for purification), measured, and tested before being transported to the refinery.
This training will provide the principle and yet some practical and theoretical aspect that can be applied on daily work faced by production engineers and supervisor in the oil industry.
Perlunya memilih provider training NISBI INDONESIA yang tepat agar pengetahuan kita mengenai … tidak salah
TUJUAN TRAINING ADVANCED PRODUCTION OPERATIONS FOR OIL AND GAS
All aspects of completions are covered in sufficient detail to permit participants to review his/her current practices The fundamental concepts of production operations and their proper application in the field Production equipment such as wellhead, tubing and packers, well completions and workover as well as well test and problems, production logging and cementing will also covered Production logs and how and when to use them; evaluation techniques for cement bond logs and pulse echo tools
Learn how to plan and implement well completions, workovers, stimulation treatments, and routine production operations with an efficiency that increases profits
Learn about the role of rock mechanics in completions, stimulation, and workovers
Be able to give suggest or discover the procedures and techniques that increase production and cut operating costs
Be Able to identify and implement production improvement opportunities that can be carried out by either rig or non-rig well interventions
Implementation of appropriate technology, either from internal or external sources, in well design, whilst ensuring that the well value is maximized
Dengan mengikuti pelatihan NISBI INDONESIA Peserta dapat berbagi pengetahuan / sharing knowledge mengenai … dengan peserta dari perusahaan lain yang bergerak di bidang …
MATERI TRAINING ADVANCED PRODUCTION OPERATIONS FOR OIL AND GAS
- GEOLOGICAL CONSIDERATION
- Formation Rock
- Primary and Secondary Migrations
- Reservoir Traps
- RESERVOIR FUNDAMENTALS THEORY
- The Nature of Rocks and Fluids
- Porosity and Permeability
- Productivity Index
- Volumetric Calculation
- Other Calculations and Decline Curves
- FLUID FLOW
- Well Productivity
- Choke and Reservoir Fluids
- Inflow and Outflow
- PRODUCTION OPERATIONS
- Well head and Well Head EquipmentMultiple Orifice
- Routine Operations
- Opening and Shut-in Well Procedure
- WELL TESTING AND SATELLITE SYSTEM
- Test Separator Operations and Equipments
- Gas Systems Instruments
- Flare System and Depressurizing
- Pigging Techniques and ProceduresSampling and Analysis
- BS & W and API Gravity Measurement
- Protective Steam Tracing
- SURFACE PRODUCTION OPERATIONS
- Process, Level, Temperature and Pressure Controls
- Oil treating , Heater treater and Dehydrator
- Separators, Stage Separators and Sizing
- Two-phase and Three-phase Separation Skimmer tank and
- Flotation unit
- WELL PROBLEMS
- Low Production and Formation Damage
- Low Reservoir
- Plug-in Tubing or Perforations
- High Viscosity
- High Back Pressure
- Inadequate Artificial Lift
- Water Production and Mechanical Problem
- Protective Steam Tracing
- PRODUCTION LOGS
- WELL COMPLETIONS
- PRIMARY CEMENTING AND SQUEEZE CEMENTING
- FLUID COMPLETIONS
- SAND CONTROL
- Gravel Pack, Resin and Fraspac
- WORKOVERS
- PARAFFIN AND ASPHALTENES
- hemical analysis
- Precipitation Mechanism
- The wax and Paraffin Problems
- OIL EMULSIONS
- Emulsion Built-up and Emulsifying Agent
- Sampling and Analysis
- Emulsion Treating
- Heat and Chemical Treatment
- Electrostatic Coalescing
- SCALE PROBLEMS
- Scale Composition, Prediction and Identification
- Mechanic and Chemical methods
- Scale Prevention and Inhibitors
- CORROSION PREVENTIONS
- Basic Theory
- Detection and Measurement
- Prevention and Material Used
- Coating and Chemicals
- Cathodic Protections and inhibitors
METODE TRAINING ADVANCED PRODUCTION OPERATIONS FOR OIL AND GAS
Metode penyelenggaraan baik secara training online atau training zoom atau training daring maupun training offline atau training tatap muka :
- Presentasi
- Diskusi antar peserta
- Studi kasus
- Simulasi
- Evaluasi
- Konsultasi dengan instruktur
TRAINER/ INSTRUKTUR
Instruktur yang berkompeten di bidang ADVANCED PRODUCTION OPERATIONS FOR OIL AND GAS
Tim Instruktur NISBI INDONESIA
Kegiatan training dan konsultansi dikelola oleh para tenaga ahli dan instruktur yang berpengalaman dan berkompeten di bidangnya. Ini akan menjadi “kunci” bagi suksesnya aktivitas training dan konsultansi yang dijalankan.Juga menjadi kunci bagi perkembangan perusahaan anda di masa depan.
Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.
JADWAL PELATIHAN 2025
- BATCH 1 : 13-14 Januari 2025
- BATCH 2 : 10-11 Februari 2025
- BATCH 3 : 10-11 Maret 2025
- BATCH 4 : 14-15 April 2025
- BATCH 5 : 15-16 Mei 2025
- BATCH 6 : 12-13 Juni 2025
- BATCH 7 : 10-11 Juli 2025
- BATCH 8 : 18-19 Agustus 2025
- BATCH 9 : 17-18 September 2025
- BATCH 10 : 16-17 Oktober 2025
- BATCH 11 : 13-14 November 2025
- BATCH 12 : 15-16 Desember 2025
TEMPAT PELAKSANAAN PELATIHAN
- REGULER TRAINING
- YOGYAKARTA, Hotel Dafam Malioboro
- JAKARTA, Hotel Amaris Tendean
- BANDUNG, Hotel Golden Flower
- SURABAYA
- BALI, Hotel Ibis Kuta
- LOMBOK – NTB
- ONLINE TRAINING VIA ZOOM
- IN HOUSE TRAINING
Note :
Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.
Investasi Pelatihan :
Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.
Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :
- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
- FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
- Module / Handout training terupdate
- FREE Flashdisk
- Sertifikat training teknik komunikasi murah
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2xCoffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
Technorati Tags: training advanced production operations for oil and gas pasti jalan,training be able to identify and implement production pasti jalan,training principle and yet some practical and theoretical aspect pasti jalan,training operations for oil and gas pasti jalan,pelatihan advanced production operations for oil and gas pasti jalan,pelatihan be able to identify and implement production pasti running
